Category: Roofing

Frisco Roof Replacement – Summary

If you need a roofing repairs or an entire new roof put on your home, there is probably one thing that concerns you the most: How much it will cost. However, it is very important to consider other factors in addition to the overall price. Having an experienced roofing contractor perform the repairs is essential to getting the job done correctly and at an honest price. Here are some questions you should ask your potential roofer before they begin work and as they are coming up with an estimate.You may want to check out Frisco Roof Replacement  for more.

Before they start taking any measurements, ask to see the necessary credentials that prove the roofer is licensed, bonded and insured. This is very important because any reputable roofing contractor has these credentials. They are necessary to protect you from being responsible for any damage or injury to the contractor or to your home. Also make sure that the roofers that the contractor employs are experienced and have a long track record of quality workmanship. A good way to guarantee that the workers who install a roof on your home are good quality contractors is if the company has a policy of performing background checks on new hires. A good contractor will provide you with references for the company and for the roofers they employ.

Follow the contractor as he takes measurements and inspects the roof. Ask about the condition of the roof planking and trusses. Make sure that any underlying problems with the roofing frame or siding is inspected during this walk through in order for the roofing contractor to give you an accurate estimate. Rotting trusses will need to be replaced, so make sure your contractor is qualified to perform that type of work. It is important to know that re-shingling a roof will not stop roof trusses from rotting if they have already started. If there are any terms or procedures that you don’t understand, be sure to ask the contractor to fully explain them to you. This will ensure you know exactly what work needs to be done to your home and why the contractor will quote you a specific price.

After the roofing contractor explains the work that is needed, you can begin picking out the shingles and shingling materials. Be sure to ask about the warranty of the shingles and any maintenance that they may need. Copies of the warranties and instructions for care should be printed out and given to you, along with the manufacturer’s contact information.

Finally, talk about a timetable. Ask the contractor to give you a rough estimate at how long the job will take to complete. Also be sure to find out about clean up and debris removal.

The contractor will give you an estimate and if you agree to the terms and are satisfied with the price, you should take one final step. Check the references. If you are pleased with what the references have to say about the roofing contractor, you should hire them and rest easy knowing that your roofer will do quality work.

Categories: Roofing

Roofing Terms

By having the right roofing terms to describe the nature of your roofing project and the type of materials for which you are looking, you’ll save lots of time and avoid the problem of having to return items because they weren’t what you thought you needed.

Roofing Material

The roofing term “roofing material” is the first of the roofing terms you need to understand. Roofing materials are what are used to construct roofs, and over eighty percent of residential roofs in the Untied States are made of asphalt shingle roofing material. But other roofing materials are different kinds of metals, tile, wood, slate, and even rubber.You can find out more,Staten Island – C&D Staten Island Roofing.

If you want an asphalt roof, you’ll need to know the roofing terms used to refer to the two types of asphalt shingles, which are organic and fiberglass. Fiberglass roofing shingles have a fiberglass mat which makes them more fire resistant than composition shingles. But composition asphalt shingles are made with natural mats of wood, cellulose fiber, or recyclable corrugated cardboard, which makes them more environmentally friendly.

Other Essential Roofing Terms

The next roofing terms you’ll have to know are “roofing nails” and “roofing screws.” Roofing nails are used to secure all roofing materials except metal and rubber. Metal roofing is secured with roofing screws, and rubber roofing is secured with an adhesive and weighted down while the adhesive dries.

The next of the necessary roofing terms is “roof edging.” Roof edging is a strip of either aluminum or steel is run around the entire perimeter of a roof both to create a finished appearance and to support the shingles which extend out over the roof’s edges. Roof edging is also used along the edges of “roll roofing,’ another of the roofing terms describing rolls of felt soaked in tar which are rolled out on a roof prior to the installation of the shingles, to act as extra leak prevention.

Describing the Roof Itself

Roofing terms which apply to the roofing contractors itself include the “crown,” which is the highest point of a peaked roof, and the “edge,” which is the edge either along the sides of gables or along the gutters. An “overlap” is the term for the area of one shingle placed over the edge of another, and “roof glue” is only one of the different roofing terms referring to the tarry adhesive which roofers seal one layer of shingles to an underlying layer when working in areas or along edges where the use of nails is awkward.

There are other roofing terms you will eventually learn, but this list is enough to get you started on your way!

Categories: Business Roofing


Commercial Roofer Vs Residential Roofer

You might have noticed that some contractors list themselves under commercial roofer while others list themselves under residential roofer. Some others are qualified to do both. But what separates them?

A good commercial roofer will know exactly what needs to be done. Commercial applications require a different skill set from residential applications. The time factor is especially important. While homeowners may be okay with a two week job, a business is on a tighter schedule. Really, businesses cannot afford to take two or more weeks off for a roof job.More tips here, Windows.

A roofing contractor needs to have the needed man-power and skills to accomplish a commercial job in a very timely manner. While personal homes may require just one person, a business may require a full crew to accomplish the job.

The materials used are very different as well. Instead of asphalt shingles, some use a special coating to cover the whole roof.

Waterproofing is especially important too. With all the valuable assets underneath, it is imperative that leaks do not occur.

Maintenance will need to be done on a regular basis too to keep everything in good order. For businesses, regular maintenance cannot be overlooked. Otherwise, it can lead to costly damages that may result from leaks.

Many businesses also have a very complicated system on their roofs. There could be smoke stacks, ventilation systems, roof entrances, external machinery, and maybe even skylights. Residences, on the other hand, may only have an ac unit and a chimney.

The technology used is also different. Commercial roofers keep up with all the latest developments in their field while residential roofers keep up with technology related to homes. Each is different.

Categories: Business Roofing